RE: What are the RAM-card requirements for loading LAWO-equipment?, 20 Dec. 2013 21:27

---

Wittener90:

Wenn ich mir das ganze hier durchlese kommt mir doch gleich die Frage auf.

Muss es bei beinem Premium Control unbedingt eine SRAM Karte sein? Oder geht auch eine PCMCIA Adapterkarte für Compakt Flash o.ä ??

SRAM Karten sind ja teuer und in günstig bzw gebraucht sehr rar

---

RE: What are the RAM-card requirements for loading LAWO-equipment?, 09 Jul. 2014 20:50

---

Brose-Matrix:

Hi Kien,

you don´t need the L1151A or omnidrive.
The problem are the byte positions on the Ram-card. The controller expects the data at specific points.
I sent you an email with a formated bin-file. The file is for 512KB cards, the minimum capacity for the Mono-Controllers.
My way of formating S-RAM cards for Lawo with the german version of the HxD (tested with CU1 and CU3):

1. put the card into the slot and be sure that the drive is listet in the explorer and you have access on the card
2. open the file: "lawo_formatiert.bin" in the HxD, set the "Bytes pro Zeile" to 16 (it looks better)
3. go to "Extras" choose "Datenträger öffnen" and remove the checkmark "Schreibgeschützt öffnen" and choose your SRAM card-volume >OK
4. go to "Bearbeiten" > "Alles markieren" > "Bearbeiten" > "Auswahl füllen" and set the "Hex-Werte" to "FF" > set "Durchläufe>Hinzufügen" to "5.Durchlauf" > OK
-This is important for deleting the complete (larger) volume, because the lawo_formatiert.bin has just 512kB.
5. go to "Datei" > "Speichern" accept the following warning with "ja"

Note: you should not remove the card this time!

6. go to the other window with the lawo_formatiert.bin file and go to "Bearbeiten" > "Alles markieren" > "Bearbeiten" > "Kopieren"
7. go to the window with the SRAM card and set the cursor in the beginning of the first line without mark it
8. go to "Bearbeiten" > "Schreiben"
9. go to "Datei" > "Speichern" accept the following warning with "ja"

Now you can load the card ("Texte, Betriebsprogramme") with TED and it should works in your display. Use separate cards for "Betriebsprogramm" and "Texte", do not load both on one card.

Best regards, Raiko

---